CTX beta 1250 TC (Reference-Nr. 071693)

•  
  Numer referencyjny 071693

  Rok produkcji 2025

  Roboczogodziny Brak informacji

• Dostawca

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Głównych Kategoria

  Maszyny do obróbki metalu

• Kategoria

  Centra obróbcze

• Typ maszyny

  Centra obróbcze (uniwersalne)

• Marka

  DMG MORI

• Sterowanie

  Siemens

• Opis

  
  

  General
  - Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	500 mm
  Max. Turning Length	1200 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle diametre on front bearing	130 mm
  Spindle bore	87 mm
  Main drive 1
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	32 kW
  Speed range	- 5000 rpm
  Torque (100% DC)	280 Nm
  Max. torque (40% DC)	360 Nm
  Turning-milling spindle
  Spindle taper	HSK-A 63 DIN 69893
  Spindle speed	-12000 rpm
  Drive power (100% DC)	19 kW
  Torque (100% DC)	85 Nm
  Drive power (40% DC)	22 kW
  Torque (40% DC)	120 Nm
  locking moment	850 Nm
  Floor space/Weight
  Weight approx.	12000 Kg
  Dimensions (L x W x H)	5,86 x 2,07 x 2,3 m

• Specyfikacja

  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  5-axis simultaneus machining	5-axis simultaneous machining
  Interpolation turning	Turning-recessing cycle Manufacture of simple sealing Surfaces and grooves using turn/mill centers
  Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Tool sort cykle	Order of the tools in the chain magazine according to the respective call in editing program. Time-optimized sort in chain magazine by using the shuttle instead of the spindle. No relocation of multitools.
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  Gear Broaching	Technology cycle for pushing internal and external gear teeth on components with single-tooth or multi-tooth shaping tools. The workpiece, the tool and the process parameters can be specified via an operating mask by the user. Important settings of
  Hollow clamping attachment, Ø 67 mm	Hydraulic hollow clamping attachment dia. 67 mm (2.63 inch) Pullforce 64 kN at pmax 45 bar
  Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
  Dynamic two-pressure clamping at the control, MS	Dynamic two-pressure clamping at the control for the main spindle The clamping pressure can be specified by NC program
  Dyn. two-pressure clamping, motor-adj. valves CS	Dynamic two-pressure clamping for the counter spindle with motor-adjustable valves The clamping pressure can be specified by the NC program
  Coolant/compressed air switchable on spindle(s)	Cooling lubricant and compressed air switchable on the spindles by M-function Valid for: - Chuck rinsing device outside of the main and counter spindle* - Coolant supply through the main and counter spindle* Note: - *Only valid if the corresponding
  Counter spindle ISM 52	Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lb*ft - Speed range 0-6000 rpm - Partial hollow clampin
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Machine preparation for fine metal chips	Machine and cooling unit preparation for fine metal chips consisting of: - Modified quick suctioning pump on chip conveyor - Presetted movement of band filter - Bigger chip tank (cart) - Removal of plug-type strainer out of chip conveyor (Only in conn
  Extension of the discharge chute about 300 mm	Extension of the discharge chute at the chip conveyor about 300 mm
  BFU 8/20 bar, frequ. con., 600 l	Coolant system 8/20 bar consisting of - Coolant tank 600 l, 8 bar/80 l/min and 20 bar/40 l/min with frequency controlled pumps selectable via M- and H-function, with feed through the tool carrier* - The pressure of the pump can be varied from 8
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  Renishaw Powerprobe Reporter App for CELOS	Renishaw Powerprobe Reporter App Easy monitoring of geometrical tolerances
  Workpiece touch probe RMP40, Renishaw	Workpiece touch probe RMP40, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Notes: - Custom meas
  Calibration device RMP40, Renishaw	Calibration device for the workpiece touch probe RMP40 from Renishaw Scope: magnetic base holder and a polished ground calibration ball (Ø 25 mm), packed in a carrying case Note: Only in connection with workpiece touch probe RMP40
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  Chain magazine for 48 tools HSK-A 63	Tool magazine, 48-fold chain magazine with double gripper with cam drive instead of tool disc magazine, tool reception HSK-63A DIN 69893. only with Siemens control. Surcharge
  Tool pre-setting probe,make RENISHAW	Tool pre-setting probe, make Renishaw positioned over the spindle axes, composed by: - Laser measuring device NC4 with measuring and calibration software for measuring in diametre- length and wear of the multi-insert boring and milling tools; - Measuring
  Sensor package Industry 4.0	Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option)
  Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
  Package for tropical climate (ambient temp.50ºC)	Package for tropical climate for ambient temperature of max. 50ºC, consisting of cooling system for control cabinet (until 50º) and machine
  Window rinsing of the security window	Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining)
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine

• Stan

  Używany